Description:

The Piaggio MP3 has the Hybrid Market the world’s first hybrid scooter, a vehicle designed to revolutionize the field of urban mobility. It is not just a ‘scooter with two engines’, but of an advanced vehicle that integrates traditional thermal propulsion with low environmental impact, zero-emission electric motor thus adding the advantages of both engines.

With its unique technology, it is the first vehicle across the automotive industry using ion battery that offers the ability to be recharged on the grid, the Piaggio MP3 Hybrid reduced by more than 50% of both consumption petrol and emissions of carbon dioxide, while highlighting the features of high technology, safety and driving fun are currently marking the success of the Piaggio MP3, the revolutionary three-wheeled scooter.

MECHANICAL
Motor Type: Single cylinder 4-stroke (synchronous three-phase brushless permanent e imagens), SOHC, 4 valves
Refrigeration: Liquid
IC Engine Displacement: 124 cc
Bore x Stroke: 57 x 48.6 mm
Thermodynamic Cycle: Camshaft, 4 valves
Ignition System: Digital Electronic inductive discharge
Hybrid Engine Power: 11 Kw (15 hp) / 8,500 rpm
Torque Hybrid: 16 Nm / 3,000 rpm
Electrical Machines: Synchronous permanent magnet brushless motor
Feeding: Electronic fuel injection with electronic accelerator “Ride by Wire” (battery 36V 31Ah Li-ion)
Voltage: Three-phase AC
Electrical Machine Control: Air
Power Electric Machine: 2.6 kW (3.5 hp)
Par Electrical Machine: 15 Nm
Operating mode: 4 types: type 2 hybrid, 2 electric type (including reverse)
Battery Recharge Mode: In motion, braking and deceleration, the power supply (battery charger integrated control electronics)
Traction Battery: Lithium ion
Transmission: Drive with centrifugal and torque regulation
Motor Control System: Ride Type-by-Wire closed circuit fuel injection (closed-loop)
Exhaust Gas Treatment: Catalyst
MOTO—STRUCTURE
Chassis: Double-cradle steel tube of high resistance
Front Suspension: Articulated quadrilateral consists of four aluminum arms supporting two steering tubes with pin suspension movement by pushing the wheel axle
Rear Suspension: Two dual effect hydraulic shock absorbers and adjustable spring preload
Front brake: Two discs of stainless steel and dual-piston floating caliper ø30 mm
Diameter:240 mm
Back brake: Stainless steel disc and calliper ø 30 mm opposed pistons
Diameter:240 mm
Front Tire: Aluminum alloy 12 “x 3.00
Rear Tire: Aluminum alloy 14 “x 3.75
Tires Front: Tubeless 120/70-12 “x 2
Rear Tire: Tubeless 14/60-14 ”
GENERAL INFORMATION
Total Length: 2140 mm
Total Width : 760 mm
Wheelbase: 1,490 mm
Seat Height: 780 mm
Storage Capacity: 12 L (Reserve: 1.8 Liter)
Complies: EURO 3