Moto Guzzi Bellagio

Moto Guzzi Bellagio

Description:

From the cylinders of the 1100s and the crankshaft of the 850-940er engine was created for the Bellagio. Who knows but a striking break torque 3000-4000 tours are no significant weaknesses, from 5000 rpm it becomes really grim. Thanks to the handy and stable chassis, it is fun to let him attack. Overall characteristics and seating position combine a lot of traveling with some active Naked Bike Cruiser ornaments.


Moto Guzzi Bellagio

MECHANICAL
Engine Type: V-twin at 90 º 4-stroke
Displacement: 935.6 cc
Refrigeration: By air
Compression Ratio: 10: 1
Bore x Stroke: 95 mm x 66 mm
Distribution: 2 Valves
Diagram of: Opening of the intake valves 24 ° PPMS
Valve closing 52 ° ABDC intake
Opening the exhaust valves 54 ° PPMI
Exhaust valve closing 22 ° ATDC
Measured with the balance control valve set
Maximum Power: 74.78 hp / 7,200 rpm
Maximum Torque: 78 Nm / 6,000 rpm
Feeding: Multipoint sequential electronic injection, Magneti Marelli IAW alfa-n system, and 2 throttle bodies of 40 mm with injectors Weber IW 031
Lubrication: Forced with pump pressure regulator
On: Electric
Start: Digital Electronic inductive discharge Magneti Marelli IAW 15RC
Clutch: Dry with mechanical control
Change: 6 Speeds
Primary Transmission: Gears: 24/35 = 1: 1,458
Final Transmission : 12/44 = 1: 3,667
Ratio Change
1 st speed: 17/38 = 1: 2,235
2 nd Speed: 20/34 = 1: 1.7
3rd gear: 23/31 = 1.348
4th gear: 26/29 = 1: 1,115
5th gear: 31/30 = 1: 0.968
6th gear: 29/25 = 1: 0.862
Escape: Stainless steel, 2 tubes connected to 1 expansion chamber connected to two chromed steel silencers; 3-way catalyst lambda probe
MOTO–STRUCTURE
Chassis: Double-cradle tubular steel with high yield
Advance: 165 mm
Angle of rotation: 28 º
Front Suspension: Marzocchi hydraulic telescopic fork, separately adjustable
Bar diameter:45 mm.
Travel: 140 mm.
Rear Suspension: Mono-shock with adjustable ergonomic knob for adjusting the preload
Travel: 120 mm.
Front brake: Double stainless steel floating discs, floating Brembo calipers of 2 parallel pistons
Diameter:320 mm
Back brake: Stainless steel disc, floating Brembo calipers of 2 parallel pistons
Diameter:282 mm.
Front Tire: 3.50 “x 18″ aluminum alloy (tubeless tubeless)
Rear Tire: 5.50 “x 17″ aluminum alloy (tubeless tubeless)
Front tire: 120/70 ZR18 M / C (59W) TL Roadtec Z6
Rear tire: 180/55 ZR17 M / C (73W) TL Roadtec Z6
GENERAL INFORMATION
Length: 2270 mm
Width: 890 mm
Height: 1,310 mm
Wheelbase: 1570 mm
Seat Height: 780 mm
Weight: 224 Kg
Fuel Tank: 19 liters (4 liters reserve)
Approval: Euro 3

More from this category

More from this author

rss Subscribe to this author

More Motorcycles and Accessories

Trial – Moto Guzzi V7 Racer 2011 Description: This could not be otherwise. When we had it made in September...
Aquila Nera Moto Guzzi Bellagio Description: Once again, Bellagio is technically unchanged into the next model...
Moto Guzzi V12 X Description: Moto Guzzi V12 X : lookee supermotard can be imagined on small...
Moto Guzzi: A kit arrives to give the air of competition V7 Description: That's a nice initiative that will soon make concessions in vogue...
Moto Guzzi Nevada 750 Description: Many have accepted the part-time or temporary work. Others are...

Tagged as: , , , ,


Recent Comments
Blog Roll