Honda sh 300 i (2011)

Honda Scoopy 300 i (2011)


Honda Scoopy 300 i Technically, the difference with the original 300 Scoopy lies in a new frame and a revised suspension, however, maintain the measures and previous structure. It also highlights the incorporation of a new radial rear tire.

The Scoopy 300 2011 is two millimeters shorter and less wide than its predecessor, while increasing total height of 1,187 mm to 1,195 mm.

The wheelbase increases by two millimeters. A note that the total weight is reduced to two kilos of 167 kg. Be marketed in the same black and white that the current, which are also two shades of blue (one foil) and a silver.

Honda Scoopy 300 i (2011)

Engine Type: Single-cylinder, 4 stroke, 4 valve, SOHC (Single overhead camshaft cylinder head)
Cooling: Liquid
Displacement: 279.1 cc
Bore x Stroke: 72 x 68.5 mm
Compression Ratio: 10.5: 1
Maximum Power: 27.19 hp (20 kW) / 8,500 rpm
Maximum Torque: Nm/6.000 26.5 rpm
Idle Speed: 1,550 rpm
Power System: PGM-FI electronic fuel injection
Diameter Butterfly: 34 mm
Air Filter: Dry, cartridge-type paper
Ignition System: Digital transistorized with electronic advance
Power Forward: 10 º BTDC-27 ° BTDC (8,500 rpm)
Sparkplug Type: LMAR8A-9 (NGK)
Start: Electrical
Battery Capacity: 12 V/11 AH
Power Alternator: 340 W
Lighthouses: 12 V, 55 W x1 (short) / 60 W x 1 (high)
Clutch: Automatic, centrifugal
Transmission Type: V-Matic
Correa Relations: 2.3 ~ 0.8 50
Final Reduction: 8.571
Final :Transmission Belt V-Belt
Chassis: Lower column, steel tube
Advance: 98 mm
Guidelines: 27 ° 30 ‘
Front Suspension: Telescopic fork
Diameter:35 mm
Travel:102 mm
Rear Suspension: Dual-damper unit swingarm
Travel:95 mm
Front brake: Hydraulic disc with 3-piston calliper, drilled rotor (* ABS) and sintered metal pads
Diameter:256 mm x 4.5 mm
Back brake: Hydraulic disc with 1 piston calliper, drilled rotor (* ABS) and sintered metal pads
Diameter:256 mm x 5 mm
Front Tire: Cast aluminum wheel with 6-spoke U-section, 16 x MT2, 75
Rear Tire: Cast aluminum wheel with 6-spoke U-section, 16M / C x MT3, 5
Front Tire Size: 110/70-16 (52S)
Rear Tire Size: 130/70-16 (61S)
Front Tire Pressure: 200 kPa
Rear tire pressure : 250 kPa
Total length: 2,098 mm
Total Width: 728 mm
Total Height: 1,195 mm
Wheelbase: 1,422 mm
Seat Height : 785 mm
Ground Clearance: 136 mm
Weight in running order: 167 Kg (D: 63 kg, T: 104 Kg) 170 Kg * (D: 66 kg, T: 104 Kg)
Maximum Load Capacity: 180 Kg
Oil Tank Capacity: 1.7 Liter
Tank Capacity: 9 Liters

You might also like

Honda Xl 700v Transalp Description: Honda- 2 Hand (New vehicle), onboard computer, guarantee up to 3 / 2012, service...
Sw t Honda 400 (2011) Description: Sw t Honda four hundred classic and elegant design, a scooter has a number of other...
Ixrace: 2 pots for the Honda 700 NC X Description: Ixrace does not one but two new features for X NC700 (for back testing of the Honda...
Honda CBF1000F slideshow Description: New to the fleet test: Honda CBF1000F. The CBF was already more than impeccable motorcycle....

Tagged as: , , ,

Recent Comments
Blog Roll